Process Engineer

hace 1 mes

Tijuana, México Barbachano International A tiempo completo

THE COMPANY

Barbachano International has been retained by our client, a growing company based in California that has over twenty-five years’ experience specializing in the design and manufacture of high-quality RF & Microwave ceramic chip capacitors, inductors and integrated passives (passive electronic components). As a result of growth, they currently seek a Front-End Process Engineer for their site in Tijuana, BC Mexico. Our client is a global leader in the production of high frequency ceramic solutions through optimization of ceramics, inks, and RF circuit designs.

THE POSITION

The Front-End Process Engineer will be responsible for the front-end process engineering duties for the Tijuana, BC Mexico plant in the areas of Mixing, Casting, and Screening in the manufacturing of ceramic capacitors. The individual must have or acquire a detailed knowledge of each front-end process and apply critical thinking to solve manufacturing problems and maintain a smooth workflow. The candidate must be able to provide technical and manufacturing leadership to both the Engineering and Production personnel in the areas. The individual will be expected to achieve goal metrics for yield in each process step leading to an improved on-time delivery.

Essential Functions:
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential functions are as follows:

  • Take ownership of department performance and optimize yields
  • Develop and implement control methods for critical process steps
  • Create and organize multi-functional teams of Process Engineers, Quality personnel, and Operators
  • Create and execute Design of Experiments (DOE) and report experimental results
  • Author specifications and procedures and train personnel in their use
  • Maintain a neat and clean work environment to clean room standards
  • Additional or different functions may be assigned to the employee at any time

Supervisory Responsibility:

  • May be asked to supervise the work assignments and monitor the progress of other members of the Engineering staff in the factory

Responsibility For Confidentiality:

  • Process/Trade secrets must be kept to the fullest of confidentiality

Work Environment:

  • This job requires working in a clean room manufacturing/production environment wearing appropriate clean room attire

Physical and Mental Demands:

The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to do the following:

  • Perform a wide range of tasks as dictated by variable demands and changing conditions
  • Plan work assignments and create schedules to meet long-term goals and objectives
  • Must independently apply abstract principles to solve complex conceptual issues
  • Required to sit; use hands to handle or feel and talk or hear
  • Must be able to describe complex issues in written and oral form
  • Must work with diverse groups to obtain consensus on complex issues
  • The employee is frequently required to reach with hands and arms
  • The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl
  • The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus

Position Type/Expected Hours Of Work:

This is a full-time position. Forty-eight or more (48+) hours within a workweek.

TRAVEL
No travel is expected for this position.

OTHER DUTIES
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.

THE CANDIDATE

Required Education and Experience:

  • BS in Engineering (Ceramics, Materials / Materials Science, Chemical) May consider Industrial engineering if the candidate has hands on experience with ceramic capacitors
  • Experience in a laboratory or similar
  • 3-5 years minimum experience working as a Process Engineer in support of medium to high volume manufacturing while making substantial improvements to Yield and Quality. If the candidate has a bachelor’s degree in material science or Ceramics, will consider having less experience as a process engineer
  • Experience with passive electronic components or similar is required
  • Design of Experiments (DOE)
  • Proficient in English 70% and fluent in Spanish.

Preferred Education and Experience:

  • MS in Engineering (Ceramics, Materials, Chemical, etc.)
  • Experience with Ceramic capacitors is a plus
  • Ideal candidate will have good problem-solving skills and analytical skills

  • Process Engineer

    hace 1 día

    Tijuana, México North American Production Sharing A tiempo completo

    Importante empresa empresa dedicada a la fabricación de controles electrónicos, bombas, sistemas y accesorios para tinas de hidromasajes y piscinas se encuentra en la búsqueda de un **Process Engineer** **_ Actividades:_** - Digirir Proyectos de Mejora Continua. - Reporteo y seguimiento a quejas de clientes. - Analisis de...

  • Process Engineer Jr

    hace 1 día

    Tijuana, México North American Production Sharing A tiempo completo

    Importante empresa dedicada a la realización de componentes para tinas de hidromasaje se encuentra en la busqueda de un **Process Engineer Jr**. **_ Functions & Responsibilities_** - Lead and participate in lean manufacturing activities striving for continuous improvement. - Lead Kaizen and Problem-Solving teams and promote improvement activities. -...

  • Associate Process Engineer

    hace 3 días

    Tijuana, México Hyundai de México, S.A. de C.V. A tiempo completo

    Descripción y detalle de las actividades Work Process Elaboration Time Study Analysis Visual Spec Sheets ISO Documentation Experiência y requisitos Experience:1 Year minimum Education required:Industrial Engineer. 80% English Well Organized and Punctual. Work Process Chart Elaboration & Documentation. **Número de vacantes** 1 **Área**...

  • Process Engineer

    hace 3 semanas

    Tijuana, México Sensata Technologies A tiempo completo

    The Process Engineer is responsible for developing or modifying manufacturing processes to increase product performance, improve manufacturing efficiency and boost profits. This position works closely with design engineers, equipment vendors, program managers, marketing, and quality engineers to support the development of new electromechanical products. They...

  • Process Engineer Jr

    hace 1 día

    Tijuana, México North American Production Sharing de México S.A. de C.V. A tiempo completo

    Importante empresa empresa dedicada a la fabricación de controles electrónicos, bombas, sistemas y accesorios para tinas de hidromasajes y piscinas se encuentra en la búsqueda de un **Process Engineer** - **Actividades**:_ - Digirir Proyectos de Mejora Continua. - Reporteo y seguimiento a quejas de clientes. - Analisis de Defectos. -...

  • Process Engineer

    hace 1 semana

    Tijuana, México HARMAN International A tiempo completo

    About The RoleResponsible of the management of new launches transfer of lines, increase capacity and layout improvements. Improvement ideas development to get process optimization, increase capacity and cost reduction, through continuous improvement. Innovative strategies deployment by applying the Harman Production System philosophy.Your TeamN/AWhat You...

  • Process Engineer

    hace 1 semana

    Tijuana, Baja California, México HARMAN International A tiempo completo

    About The RoleResponsible of the management of new launches transfer of lines, increase capacity and layout improvements. Improvement ideas development to get process optimization, increase capacity and cost reduction, through continuous improvement. Innovative strategies deployment by applying the Harman Production System philosophy.Your TeamN/AWhat You...

  • Process Engineer

    hace 6 días

    Tijuana, México Emprego MX A tiempo completo

    **Descripción y detalle de las actividades** - Coordination of projects for the installation of new production lines according to APQP procedure - Process capacity studies - Analysis and troubleshooting - Evaluation and documentation of engineering tests - Follow-up and execution of work plans to improve production indicatorsproduction indicators - Process...

  • Sr Process Engineer

    hace 3 semanas

    Tijuana, México CommScope A tiempo completo

    In our ‘always on’ world, we believe it’s essential to have a genuine connection with the work you do. Technology is reshaping the way we live, learn and thrive! In this "always-on" world, we believe it is meaningful to have a genuine connection with the work you do. The epicenter of this transformation is powered by the world's most sophisticated...

  • Process Engineer

    hace 1 día

    Tijuana, México Emprego MX A tiempo completo

    **Descripción y detalle de las actividades** - Objectives: Responsible of implementation, processes creation and procedures of production; projects leader to improve efficiency and productivity, based on actions to reduce waste, assure ergonomy, quality and cost of operation.Principal functions: - Technical support to production department. Responsible for...

  • (6005) Assembly Process Engineer

    hace 4 semanas

    Tijuana, México ALTEN MÉXICO A tiempo completo

    ALTEN MÉXICO is a subsidiary of the renowned ALTEN Group, a global leader in engineering and information technology consulting. With a presence in 30 countries worldwide, ALTEN Group provides comprehensive engineering solutions, covering the entire development cycle of projects. At ALTEN MÉXICO, we leverage our global experience and technical expertise to...

  • Manufacturing Engineer

    hace 2 semanas

    Tijuana, México Vertiv A tiempo completo

    POSITION SUMMARY Manufacturing Engineer A (Welding Engineer) is the change agent responsible for maintaining and improving a specific process on an assigned APU or Process. Oversees day to day process performance, monitors KPI’s, addresses Issues and provides with solutions always considering cost. Champion on continuous improvement and process...

  • Molding Process Engineer

    hace 4 días

    Tijuana, México Esterline México, S. de R.L. de C.V. A tiempo completo

    Descripción y detalle de las actividades - Implement, evaluate and qualify changes to existing processes or tools designed to improve product quality, productivity and equipment efficiency. Performs optimization to the Molding process and equipment using scientific molding principles and problem analysis and resolution tools. - Demonstrated ability to...

  • Process Engineer I

    hace 3 semanas

    Tijuana, México Medtronic A tiempo completo

    **Careers that Change Lives **A Day in the Life Responsibilities may include the following and other duties may be assigned. - Provides technical and sustaining engineering support in a manufacturing area. - Recommends and implements equipment and process modifications to meet quality standards and improve production efficiencies, manufacturing techniques as...

  • Process Engineer Ii

    hace 4 días

    Tijuana, México Medtronic A tiempo completo

    **Careers that Change Lives **A Day in the Life Responsibilities may include the following and other duties may be assigned. - Provides technical and sustaining engineering support in a manufacturing area. - Recommends and implements equipment and process modifications to meet quality standards and improve production efficiencies, manufacturing techniques as...

  • (6005) Assembly Process Engineer

    hace 3 semanas

    Tijuana, B.C., México ALTEN MÉXICO A tiempo completo

    ALTEN MÉXICO is a subsidiary of the renowned ALTEN Group, a global leader in engineering and information technology consulting. With a presence in 30 countries worldwide, ALTEN Group provides comprehensive engineering solutions, covering the entire development cycle of projects. At ALTEN MÉXICO, we leverage our global experience and technical expertise to...

  • Process Engineer 2do Turno

    hace 5 días

    Tijuana, México Emprego MX A tiempo completo

    **Descripción y detalle de las actividades** - Working knowledge of developing Manufacturing Process using Lean Manufacturing principles and PTH, SMT, Cables process. Working knowledge of developing Process Control Plans using Six Sigma Tools. Working knowledge of cost justifications for new capital equipment. **Experiência y requisitos** - Bachelor's...

  • Plating Engineer

    hace 4 días

    Tijuana, México Eaton A tiempo completo

    Eaton’s AER ITD division is currently seeking a Plating Engineer. **What you’ll do**: Plating engineer will be responsible for enhancing the plating (chemical) processes. The individual will manage test work, prepare basic design packages (Flow Sheets, Mass Balance, Equipment specifications) and collaborates with the engineer leader with simulations for...

  • Industrial / Process Engineer

    hace 7 días

    Tijuana, México North American Production Sharing A tiempo completo

    **Goals**: - Support assembly operations by establishing production lines; with equipment, fixtures, tooling and safety standards to support the capacity and workloads. - Work within the parameters of the QM System to help achieve general and company-specific quality efforts and growth goals. - Supporting team that can develop customer products by guiding...

  • Sr. Manufacturing Engineer

    hace 5 días

    Tijuana, México Emprego MX A tiempo completo

    Descripción y detalle de las actividades Experiência y requisitos - Mechanical Engineer, Mechatronic Engineer, Electrical Engineer, Electromechanic Engineer, Systems Engineer or similar. Experience: - 6 to 8 years’ experience on engineering field. Medical companies as a plus. - Experience in problem solving, project management, lean practices, six...