Smt Manufacturing Engineer

hace 7 días

Tijuana, Baja California, México Eaton Corporation A tiempo completo
Eaton's VEH EMB eMobility division is currently seeking a SMT Manufacturing Engineer.

What you'll do:


Responsible to design, validate and implement SMT manufacturing systems; including process documentation, control and optimization through the life of the product.

An Engineer seeks and promotes the continuous improvement of the manufacturing processes on current and transfers businesses.

Supports Production Area, contribute to the SQDCI metrics of the focus factory.

Participate on required meetings related to the focus factory, participates in safety assessments and generate JSA and MOC (Job safety analysis and Management of changes).

Manages SMT technicians for production support, program development, NPI support and other.

Create, design, validate and implement manufacturing systems (assembly lines) including documentation (PFMEA, WIs, flow chart, procedures) and establishes and implement process controls.

Participate on quality system improvements and implement changes accordingly through the APQP methodology.
Develop and implement tools as per new or revised requirements (standard tooling) and new design fixtures for assembly (fixtures, stencils)
Establishes preventive maintenance program for new assembly systems or stations.
Deals with process abnormities, improves pass rate and decrease rejection rate and evaluates new components.
Develop and implement Industry 4.0 initiatives linked to an automotive mindset.
Develop and implement product/process changes such as MCO's, deviations and validations.

Seeks and promotes the continuous improvement (Lean manufacturing system), Uses daily production data (yields/thru-put/etc.) to develop and execute corrective actions plans to drive continuous improvement.

Routing management in the ERP system (SAP), Participate during layout changes.

EHS Responsibilities:
Report any activity that may jeopardize my safety and the environment.
Identify and properly dispose all the chemicals that may contaminate the environment.
Ensure the correct container for the disposal of hazardous waste (identified containers and containers to prevent spills).

Report the entry of new Chemicals required for Maintenance purposes due to maintain a record updated and assure the compliance of the correct handling of them.

Contain oil spills and repair as necessary.

Qualifications:

Bachelor's Degree in Industrial Engineering, Electronics or Mechanics (or similar).
3 years minumum of experience in SMT manufacturing and equipment areas and/or similar position.
Experience/knowledge with process and equipment validation, PFEMA, process flow, APQP, etc.
Strong knowledge in IPC-A-610 and IPC-7711/21. Basic knowledge on CQI-17.

Skills:

Strong written and verbal communication skills in English and Spanish, leadershil skills, proactive, strong organization and analytical thinker.

We are committed to ensuring equal employment opportunities for job applicants and employees.

Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.

  • Sr. Manufacturing Smt Engineer

    hace 7 días

    Tijuana, Baja California, México North American Production Sharing de México S.A. de C.V. A tiempo completo

    Empresa internacional dedicada a la electrónica buscaSr. Manufacturing SMT EngineerActividades: Elabora layout de áreas de producción.Elabora y actualiza diagramas de flujo.Actualiza y corrige procedimientos de manufactura.Toma tiempos y balanceo de lineas.Realiza corridas para pruebas de diseno de manufactura.Documentar cambios y actualizaciones en el...

  • Smt Engineer

    hace 7 días

    Tijuana, Baja California, México North American Production Sharing de México S.A. de C.V. A tiempo completo

    Empresa de giro electrónico ubicada en otay busca SMT ENGINEER:OBJETIVO: Asegura el buen funcionamiento de las máquinas SMT, sus procedimientos y formatos.FUNCIONES PRINCIPALES:Mantenimiento Preventivo y correctivo en máquinas empastadoras, Montadoras (Pick and Place), Horno Reflujo, AOI, SPI.Programación del equipo SMT.Mantiene la Integridad del...

  • Smt Engineer

    hace 7 días

    Tijuana, Baja California, México North American Production Sharing de México S.A. de C.V. A tiempo completo

    OBJETIVO:Asegura el buen funcionamiento de las máquinas SMT, sus procedimientos y formatos.FUNCIONES PRINCIPALES:Mantenimiento Preventivo y correctivo en máquinas empastadoras, Montadoras (Pick and Place), Horno Reflujo, AOI, SPI.Programación del equipo SMTMantiene la Integridad del Funcionamiento de las máquinas SMTAsegurar que se complete el check list...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Eaton A tiempo completo

    Eaton's IS VEH EMB division is currently seeking a Manufacturing Engineer.What you'll do:Primary Function:Responsible for designing, validating, and implementing manufacturing systems, including processes, documentation, PFMEA plans, and optimization throughout the product lifecycle. As an engineer, you seek and promote continuous improvement in...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Baxter Healthcare - Welch Allyn De Mexico, S. De R.L. De C.V. A tiempo completo

    y detalle de las actividadesAccountable for existing processes sustaining for the applicable areas. Also, is responsible of development and continuous improvement of manufacturing processes. May have complete project responsibility for significant projects within specialized area and participate in the activity's execution of the VIP's Projects.Key...

  • Técnico Para Smt

    hace 7 días

    Tijuana, Baja California, México Sumitronics Manufacturing De México A tiempo completo

    y detalle de las actividadesMantener el equipo en buenas condiciones de trabajo realizando los mantenimientos correctivos y preventivos.-Realizar mantenimientos preventivos y correctivos a maquinas de SMT Panasonic (SP60/80, NPM, CM401, CM602, DT401)Hornos de flujo, conveyor, elevadores, actividades múltiples, mejora continua etc.Experiencia y...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Thermometrics México, S.A. De C.V. A tiempo completo

    y detalle de las actividades1. Responsible for providing manufacturing support for existing products and for developing and introducing new products or transferences of equipment and machinery from other sites 2. Responsible for NPI in high visibility projects 3. Identify cost out opportunities in production, and analyze the financial and technical...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Thermometrics México, S.A. de C.V. A tiempo completo

    y detalle de las actividadesResponsible for providing manufacturing support for existing products and for developing and introducing new products or transferences of equipment and machinery from other sites 2. Responsible for NPI in high visibility projects 3. Identify cost out opportunities in production, and analyze the financial and technical feasibility...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Thermometrics México, S.A. de C.V. A tiempo completo

    y detalle de las actividadesResponsible for providing manufacturing support for existing products and for developing and introducing new products or transferences of equipment and machinery from other sites 2. Responsible for NPI in high visibility projects 3. Identify cost out opportunities in production, and analyze the financial and technical feasibility...

  • Mes Industrial Engineer

    hace 7 días

    Tijuana, Baja California, México Critical Manufacturing A tiempo completo

    The primary focus of the MES Industrial Engineer role is to flawlessly execute the deployment of Critical Manufacturing's MES system across plants all over the world in high-tech facilities manufacturing semiconductors, electronics, medical devices, automotive or other advanced complex products.Do you love getting acquainted with manufacturing processes,...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Solar Turbines A tiempo completo

    Career Area:EngineeringJob Description:Your Work Shapes the World at Caterpillar Inc.When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México North American Production Sharing de México S.A. de C.V. A tiempo completo

    Manufacturing Engineer.RESPONSABILIDADES Ayudar directamente a la producción, asegurarse de que tienen lo necesario para completar con la producción del plan. Realizar la investigación, diseño y desarrollo de procesos de fabricación, incluyendo el flujo de producción, métodos de montaje y equipos de producción de las normas de ingeniería y la...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Outset Medical A tiempo completo

    Company OverviewOutset is a medical technology company pioneering a first-of-its-kind technology to reduce the cost and complexity of dialysis. The Tablo Hemodialysis System, FDA cleared for use from the hospital to the home, represents a significant technological advancement that transforms the dialysis experience for patients and operationally simplifies...

  • Senior Manufacturing Leader

    hace 7 días

    Tijuana, Baja California, México Eaton A tiempo completo

    Eaton's IS VEH EMB division is currently seeking a Senior Manufacturing Leader.What you'll do:Primary FunctionAssures the organization's ability to meet customer, statutory and regulatory requirements applicable to the product, and the organization's own requirements. Assures that processes needed for the quality management system are established,...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Eaton A tiempo completo

    Eaton's AER FED Fluid Electrical Distribution division is currently seeking a Manufacturing Engineer.What you'll do:PRIMARY FUNCTION:Provide manufacturing technical direction and technical assistance for new and existing products, including process design and tooling requirements for manufacturing operations.The position supports continuous improvement in...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Eaton A tiempo completo

    Eaton's AER FED Fluid Electrical Distribution division is currently seeking a Manufacturing Engineer.What you'll do:PRIMARY FUNCTIONProvide manufacturing technical direction and technical assistance for new and existing products, including process design and tooling requirements for manufacturing operations.The position supports continuous improvement in...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México North American Production Sharing A tiempo completo

    Electronic company located in the Pacific area is looking for a Manufacturing Engineer to perform the following activities:Elaborate Layout of production areas. Elaborate and update flow diagrams. Perform runs for product design purities. Document changes or updates to processes. Reviews and follows up on quality nonconformities. Performs engineering...

  • Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Eaton A tiempo completo

    Eaton's AER FED Fluid Electrical Distribution division is currently seeking a Manufacturing Engineer.What you'll do:Primary Function:Provide manufacturing technical direction and technical assistance for new and existing products, including process design and tooling requirements for manufacturing operations. The position supports continuous improvement in...

  • Npi Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México Eaton A tiempo completo

    What you'll do:Responsible to design, validate and implement manufacturing systems; including process, documentation, control and optimization through the life of the product. An NPI Engineer seeks and promotes the continuous improvement of the manufacturing processes on current and transfers businesses.Responsibilities:1 Designs new manufacturing process or...

  • Dp Manufacturing Engineer

    hace 7 días

    Tijuana, Baja California, México North American Production Sharing A tiempo completo

    Manufacturing Engineer.RESPONSABILIDADES Ayudar directamente a la producción, asegurarse de que tienen lo necesario para completar con la producción del plan. Realizar la investigación, diseño y desarrollo de procesos de fabricación, incluyendo el flujo de producción, métodos de montaje y equipos de producción de las normas de ingeniería y la...