Empleos actuales relacionados con Technician.solids Control.i - Villahermosa - NOV Inc.

1. Perform and ensure the correct installation of the Solids Control and Auxiliary equipment in each of the locations.

2. Correctly dismantle the Solids Control and Auxiliary equipment at each of the locations, ensuring that these are free of mud and drilling debris.

3. Operate the Solids Control and Auxiliary equipment in each of the locations, following the established Procedures and ensuring at all times of the Operation the correct cleanliness of the Fluid.

4. Request to the Area Supervisor following the Materials Request Procedure, the necessary elements to maintain the work areas and campers rooms in order and clean conditions.

5. Perform and ensure that at all times of the Operation the equipment, work area and living area, are in order and clean conditions.

6. Request to the Area Supervisor following the Materials Request Procedure, the necessary consumables and parts (according to inventory list in well) in the daily operation of the Solids Control and Auxiliary equipment.

7. Perform both operational and safety checklist when required by the operations department and/or client.

8. Communicate to area supervisor and document any loss or damage to equipment or parts on each and every move.

9. Establish and maintain a daily report of operation activity at each of the locations to the area supervisor.

10. Comply with the safety and environmental protection policies established by the company and our customers.

11. Comply with and respect the logistics established in the relief of personnel working in each of the locations.

12. Participate and pass the assigned training courses.

13. Participate in daily meetings with the client's representative regarding safety and operations.

14. Support in the proper loading and anchoring of solids control equipment and parts, according to the transfer format when part base to base, base to well or well to well.

15. Ensure the correct use of equipment, materials and tools assigned for the correct performance of their daily activities.

16. Wear the Personal Protective Equipment required for each activity, correctly at all times of the Operation.

17. Perform the laboratory tests of solids analysis, required for the correct function of the equipment.

18. Maintain the Control, Follow-up and Order of the QMS and/or Project Documentation.