Manufacturing Engineer
hace 7 días
Are you inspired by challenging the status quo? Do you thrive in collaborative environments that drive results? If so, Gates could be for you.
Let's simplify it, think belts and hoses. Found in motorcycles, conveyer belts, cars, tractors, blenders, vacuum cleaners, bicycles, & 3D printers just to name a few. Because why not do it all?
**WHAT TO EXPECT**
As an innovation leader, we look for ambitious, forward thinking, open-minded and well-rounded individuals to join our global team. Located in our Toluca Plant, you will be a Manufacturing Engineer
- The Process Engineer is charge of design the manufacturing process focus in safety, quality, cost and customer requirements, and development, documentation, implementation and training of standard operating methods that meet the requirements and customer specifications (SOP's, Standard Work Sheets). Working instructions should be derived Control Plan, FMEA and Flow Diagram.
- Control, design, redesign and implementation of layout (distribution) of each operation, process or manufacturing cell aimed at optimizing the handling and movement of materials, add value in the use of space and facilitate continuous and synchronized flow materials.
- Measuring of Cycle Time of products in order to define labor cost, ORACLE Master Routes (Standard maintenance time per product.), balance Capacity according to process demand and Balance & define de quantity labor requirement for each manufacturing cell.
- Productivity Measurement and monitoring continuous Project Development Productivity increase.
- Development of tools, devices, racks and accessories production for compliance with safety standards, quality, ergonomics, ecology, materials handling FIFO, and customer requirements.
**Key responsibilities (to name a few)**:
- Provide technical support to the BU and operator on the production line.
- Development and Evaluation of Risk Analysis and ergonomic operations, equipment and processes.
- In charge of EP system (Control and development Poka Yoke of quality and safety).
- Leadership of GPS, 6 sigma, Lean manufacturing, Safety, Investment projects (Justification, develop and execution) and Productivity projects.
- Responsible of the Plant lay out.
- New products (Design the Process flow, standardized work, process parameters, Control Plan, Standard Operation procedures, capacity manufacture, cycle time by product, resources needed).
- Calculate and determine cycle times by product equipment and operation, determine and identify the bottlenecks of manufacturing cells.
- Justification and determination of MO for cyclic and non-cyclic operations
- Establishment and maintenance of standard time per product.
- Justification of Investment Projects due to increased capacity, productivity, reduced cost of MO, waste, defective, materials, etc.
- Development of tools, devices, racks and production accessories for compliance with safety standards, quality, ergonomics, ecology, material handling "FIFO" and customer requirements.
- Lean manufacturing tools implementation (VSM, 5'S, STW, SMED, EP, Kanban).
- Cost Control Operation with; 6 Major losses and Down time analysis, Direct and indirect labor budgeting, develops schedules and manpower requirements for assigned areas based in standard times, labor variation reduction and labor absorption. (BOR).
- Process Control (Error proofing process and implementation devices)
- Responsible to define the std. costs of Labor, Standard times, Usage cell and usage mold.
- Balance operations, Process controls, Standard operations procedures, Standard work sheets, Productivity and Capacity analysis.
- Responsible of the Supplier Capacity Study to all customer (Covisint Portal ; FORD, FCA, Chrysler, etc. & VW). GD&T Certification.
- Risk Level Reduction in Operational Risk Analysis, through improvement safety conditions of process, equipment (design of safety devices and equipment and Ergonomics projects.).
- Researches new equipment, and technologies, in order to improve manufacturing processes.
- Provide technical support to the operators on the production line.
- CCM USE & PROGRAMING
- CNC USE & PROGRAMING
- Contribute to achieve plant goals such as: KOIs of the Area, CI and savings projects
- Improvement ideas; improve and sustain Quality and Safety goals.
- IATF16946/OHSAS (core tools) knowledge.
- Layered Process Audit completion for the BU on he or she belongs.
- Adequate usage of Gates' resources (associates, machinery, materials, etc.)
- Keep a good relationship with the associates and with the union.
**ABOUT YOU**
- 2 - 4 years of experience on the same position
- Bachelor's Degree in Industrial and Mechatronic Engineering.
- 70% Bilingual English - Spanish
**WHY GATES?**
Founded in 1911 in Denver, Colorado, Gates is publicly traded on the NYSE. While we might operate in a vast amount of time zones we operate as 'One Gates' and have a common goal of pushing the boundaries of materials science. We invest in our people, bringing real
-
Engineer I-manufacturing
hace 4 días
Toluca, México ZF A tiempo completo**What's Next? Join ZF!**: ZF is a global technology company supplying systems for passenger cars, commercial vehicles and industrial technology, enabling the next generation of mobility. ZF allows vehicles to see, think and act. In the four technology domains of Vehicle Motion Control, Integrated Safety, Automated Driving, and Electric Mobility, ZF offers...
-
Manufacturing Engineer
hace 3 semanas
Toluca, México Gates Corporation A tiempo completoAre you inspired by challenging the status quo? Do you thrive in collaborative environments that drive results? If so, Gates could be for you. Let's simplify it, think belts and hoses. Found in motorcycles, conveyor belts, cars, tractors, blenders, vacuum cleaners, bicycles, & 3D printers just to name a few. Because why not do it all? **WHAT TO...
-
Manufacturing Engineer
hace 3 días
Toluca, México Gates Corporation A tiempo completoAre you inspired by challenging the status quo? Do you thrive in collaborative environments that drive results? If so, Gates could be for you. Let's simplify it, think belts and hoses. Found in motorcycles, conveyor belts, cars, tractors, blenders, vacuum cleaners, bicycles, & 3D printers just to name a few. Because why not do it all? **WHAT TO...
-
Product Engineer
hace 2 meses
Toluca, México FCM8601159X6 A tiempo completo**Position Summary**: The Diaphragm Product Engineer role will provide technical support on a global level to the elastomer formulation engineer, business unit engineering, and manufacturing on topics pertaining to diaphragms used in Emerson products. The Product Engineer will work closely with tool design, manufacturing, and quality to bring about...
-
Bms/eol Manufacturing Engineer
hace 2 meses
Toluca, México Stellantis A tiempo completoThe Battery Management System (BMS) End of Line Manufacturing Engineer is responsible for supporting design and releasing teams in manufacturing and assembly plants. This person will work closely with the lead DRE, software engineers, technical specialist, other engineers, and plant personnel to ensure Battery Management System is successfully implemented in...
-
Bms/eol Manufacturing Engineer
hace 1 día
Toluca, México Stellantis A tiempo completoThe Battery Management System (BMS) End of Line Manufacturing Engineer is responsible for supporting design and releasing teams in manufacturing and assembly plants. This person will work closely with the lead DRE, software engineers, technical specialist, other engineers, and plant personnel to ensure Battery Management System is successfully implemented in...
-
Design Engineer 1
hace 6 días
Toluca, México Nissan A tiempo completoDirect responsible of Upper body, Platform and Door Design systems for Mexico production vehicles. Expectation to find best solution in QCT [quality, cost, and timing] point of view for market requirements that involves customer usage, regulation, manufacturing process, etc. **Main Responsibilities**: Define, modify and develop design for parts in charge to...
-
Diaphragm Product Engineer
hace 2 meses
Toluca, México Fisher Controles de Mexico A tiempo completo**Position Summary**: The Diaphragm Product Engineer role will provide technical support on a global level to the elastomer formulation engineer, business unit engineering, and manufacturing on topics pertaining to diaphragms used in Emerson products. The Product Engineer will work closely with tool design, manufacturing, and quality to bring about...
-
Diaphragm Product Engineer
hace 2 meses
Toluca, México Fisher Controles de Mexico A tiempo completo**Position Summary**: The Diaphragm Product Engineer role will provide technical support on a global level to the elastomer formulation engineer, business unit engineering, and manufacturing on topics pertaining to diaphragms used in Emerson products. The Product Engineer will work closely with tool design, manufacturing, and quality to bring about...
-
Design Engineer 3
hace 7 días
Toluca, México Nissan A tiempo completoDirect responsible of Upper body, Platform and Door Design systems for Mexico production vehicles. **Main responsibilities**: Expectation to find best solution in QCT [quality, cost, and timing] point of view for market requirements that involves customer usage, regulation, manufacturing process, etc. Able to understand manufacturing process for different...
-
Bms/eol Manufacturing Engineer
hace 2 meses
Toluca, México FCA A tiempo completoThe Battery Management System (BMS) End of Line Manufacturing Engineer is responsible for supporting design and releasing teams in manufacturing and assembly plants. This person will work closely with the lead DRE, software engineers, technical specialist, other engineers, and plant personnel to ensure Battery Management System is successfully implemented in...
-
Bms/eol Manufacturing Engineer
hace 1 día
Toluca, México FCA A tiempo completoThe Battery Management System (BMS) End of Line Manufacturing Engineer is responsible for supporting design and releasing teams in manufacturing and assembly plants. This person will work closely with the lead DRE, software engineers, technical specialist, other engineers, and plant personnel to ensure Battery Management System is successfully implemented in...
-
Materials Engineer
hace 2 meses
Toluca, México FCM8601159X6 A tiempo completo**Position Summary**: The Diaphragm and Non-metallic Materials Engineer role will provide technical support on a global level to the elastomer formulation engineer, business unit engineering, and manufacturing on topics pertaining to diaphragms used in Emerson products. This position will also have the opportunity to work with other non-metallic materials...
-
Design Engineer 3- Body Design
hace 2 meses
Toluca, México Nissan A tiempo completoDirect responsible of Upper body, Platform and Door Design systems for Mexico production vehicles. Expectation to find best solution in QCT [quality, cost, and timing] point of view for market requirements that involves customer usage, regulation, manufacturing process, etc. Able to understand manufacturing process for different parts [Metal, Plastic,...
-
Design Engineer 1- Body
hace 2 meses
Toluca, México Nissan A tiempo completoDirect responsible of Upper body, Platform and Door Design systems for Mexico production vehicles. Expectation to find best solution in QCT [quality, cost, and timing] point of view for market requirements that involves customer usage, regulation, manufacturing process, etc. **Main functions**: Define, modify, develop design for parts in charge to achieve...
-
Rpt Materials Engineer
hace 2 meses
Toluca, México Fisher Controles de Mexico A tiempo completo**Position Summary**: The RPT Materials Engineer role will provide technical support on a global level to the elastomer formulation engineer, business unit engineering, and manufacturing on topics pertaining to diaphragms used in products. This position will also have the opportunity to work with other non-metallic materials (thermoplastics, carbon and...
-
Mex Manufacturing Engineer
hace 2 semanas
Toluca, México Parker Hannifin Corporation A tiempo completo**Org Marketing Statement** Parker Hannifin is the world's leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile, industrial and aerospace markets, with annual sales of $14.3 billion in fiscal year 2019.The company has operations in 50 countries around the...
-
Design Engineer
hace 1 mes
Toluca, México Michael Page A tiempo completoA Design Engineer in an HVAC (Heating, Ventilation, and Air Conditioning) department of a plastic automotive company is responsible for conceptualizing, designing, and developing components or systems related to heating, ventilation, and air conditioning in vehicles_Utilizing CAD (Computer-Aided Design) software to create detailed drawings and models of HVAC...
-
Design Engineer
hace 2 semanas
Toluca, México Michael Page A tiempo completoA Design Engineer in an HVAC (Heating, Ventilation, and Air Conditioning) department of a plastic automotive company is responsible for conceptualizing, designing, and developing components or systems related to heating, ventilation, and air conditioning in vehicles_Utilizing CAD (Computer-Aided Design) software to create detailed drawings and models of HVAC...
-
Manufacturing Test Engineer
hace 2 semanas
Toluca, México Segula Technologies A tiempo completoCompany Description Join the world of the future in a fast growing international company! At SEGULA Technologies you will have the opportunity to work on exciting projects and help shaping the future within an engineering company which is at the heart of innovation. From 3D printing, augmented reality, connected vehicle to the factory of the future - new...
