Mechanical Engineer
hace 2 meses
Overview / Responsibilities:
Massy Wood is recruiting for a Mechanical Engineer with extensive experience of process plant maintenance, design, operations and project management in the petrochemical industry.
Primary objectives are as follows:
- Responsible for plant maintenance and engineering activities on mechanical equipment and lifting devices in accordance with international standards.
- Lead the engineering and execution of technical projects (small and medium scale) with mínimal supervision.
- Responsible for planning and allocating resources, budgeting, monitoring progress, and keeping stakeholders informed throughout project lifecycles (design to execute and operation).
- Support with the coordination of activities to ensure the reliability and availability of plant systems and equipment.
**PRINCIPAL ACCOUNTABILITIES / KEY FUNCTIONS**:
- Perform preventive maintenance functions, support with troubleshooting activities and diagnose problems in Mechanical (Rotating and Static) Equipment systems using knowledge of reading P&ID’s, schematics, equipment specification and vendor service manuals.
- Ensure that equipment maintenance strategies are adequately set up and monitor the effectiveness of the programmes, maintenance reworks and makes recommendations for improvement.
- Develop procedures for installing /operating /maintaining installed new / upgraded equipment.
- Support to investigate routine mechanical equipment issues, identify fault/failures and recommend solutions/procedures for correction and prepare investigative reports on same
- Plans, coordinates, and executes statutory inspections on plant equipment (Boiler, lifting devices), routine and shutdown work including preparation of work schedules, manpower/material requirement and cost estimates.
- Responsible for the generation of MOC packages and coordination of PSSR Walkdowns.
- Develop procedures for installing, operating, maintaining new and/or upgraded equipment.
- Participates in Incident Investigations root cause analysis for operating problems including the identification of contributing causes for non-operating events and work to eliminate the root cause for continuous improvement.
- Adheres to the work management system and ensure that the CMMS system is accurately updated to capture real time information and historical data. Minimize backlog of work in area of responsibility.
- Ensures that Key Performance Indicators (KPIs) are achieved and addresses areas of shortfall.
- Engages in contract management, preparation of scope of works, contractor usage plan, tendering evaluation and analysis, procurement, execution and close-off.
- Monitors the execution of routine contracts and turnarounds to ensure that general HSE, Quality and production targets are met.
- Ensure that all work performed is of the highest quality through the development of the requisite systems and audits.
- Identify continuous improvement opportunities and communicate these to the Mechanical Superintendent. Prepares technical reports, cost estimates and management of change documents as required.
- Make recommendations to minimize stock outs by reviewing the stock of critical spares and inventory of material, tools etc. in relation to maintenance work schedules.
- Support in the preparation of annual budget implementing cost control practice consistent with the company objectives. Identify accruals for the succeeding year.
- Supports training and development of plant personnel as required.
- Participates in equipment long term planning, obsolescence/end of life strategy, repair, and replacement actions.
- Recommends/approves technical specifications for repairs to existing equipment or procurement of new equipment.
- Leads the updating of plant documentation/records and the as-built drawings for projects/modifications.
- Executes responsibilities as designated in the permit to work system.
- Participates in HSE, Trip investigations, job hazard analyses and prepares the related reports as necessary tracking department actions as required.
- Prepares technical, monthly, and other reports as required.
- Ensure compliance with all ISO policies and procedures.
- Conduct safety walks, safety meetings and housekeeping inspections as scheduled.
- Fully understand the company HSE policy, procedures, regulations and objectives as they relate to area of responsibility. Ensure that all HSE policies and procedures are implemented and consistently followed.
- ** Performs all other related job functions as required.**
Skills / Qualifications:
- Mechanical Engineering.
- At least six (6) years in the petrochemical/oil and gas industry.
- Project Engineering experience would be considered an asset.
- Knowledge of process plant maintenance, design, operations and project management in the petrochemical industry.
- Knowledge in Process Safety Management, HAZOP’s and ISO quality systems
- Excellent communications and interpersonal skills.
- Project Management Skills
- Ma
-
Senior Mechanical Engineer
hace 2 meses
La Brea, México Massy Wood A tiempo completoOverview / Responsibilites: Massy Wood is currently recruiting for a Senior Mechanical Engineer with experience in the oil and gas petrochemical industry. The Senior Mechanical Engineer is responsible for the preparation of Mechanical Engineering deliverables, such as: - Originate and check discipline deliverables. - Assist the Discipline Lead Engineer...
-
Technical Department
hace 1 semana
Chamela, La Huerta, Jal., México Rainsteal Oil & Gas Limited, UK. A tiempo completoRoustabouts / Roughnecks, Welders / Mechanics, Rig Operators / Drillers, Engineers (petroleum and mechanical) Health and safety officer, Superintendent SMP, SMP Supervisor, Document Controller Clerk, Community Superintendent, Training / HRD superintendent; SMP Engineer, Mine Engineer, Mine Surveyor, QA / QC Superintendent Steward, Shift Leader. ...
-
Manufacturing Execution System Engineer
hace 2 meses
La Estancia, México Bosch A tiempo completoJob Description Would you like to be part of the Manufacturing team for the new plant? We are looking for a talent like you! • Shaping the future: Constantly stay up-to-date on new technologies available to IT and Manufacturing execution system Engineer at Bosch in order to maintain existing applications and take advantage of technologies in the...
-
Manufacturing Execution System Engineer
hace 1 semana
La Estancia, México Bosch A tiempo completoJob Description Would you like to be part of the Manufacturing team for the new plant? We are looking for a talent like you! • Shaping the future: Constantly stay up-to-date on new technologies available to IT and Manufacturing execution system Engineer at Bosch in order to maintain existing applications and take advantage of technologies in the...
-
Waste Water Process Engineer
hace 4 días
La Barca, México Concord Enviro SA de CV A tiempo completo**Job description** **Position title**: Waste Water Process Engineer **Department**: Concord Service Team **Location**: WWTP/WTP/WRP **Full/Part-time**:Full time **Organizational relationships** **Reports to **PROJECT MANAGER **Supervises**: Technicians **Functional relationship with**: HSE Officer, Civil Engineer, Electrical & Mechanical Installation...
-
Quality Engineer
hace 17 horas
La Estancia, México Rexroth A tiempo completoCoordinate all quality activities related to a manufacturing process, through various audits and studies preparation in order to ensure the correct operation of methods, machines and used materias 1.Studies assembly by attributes for reference patterns (passes or does not pass). 2. Process development capacity studies (CPK's). 3. Coordination of level I...
-
Quality Engineer
hace 4 semanas
La Estancia, México Bosch A tiempo completoJob Description * Coordinate all quality activities related to a manufacturing process, through various audits and studies preparation in order to ensure the correct operation of methods, machines and used materias 1.Studies assembly by attributes for reference patterns (passes or does not pass). 2. Process development capacity studies (CPK's). 3....
-
Quality Engineer
hace 4 semanas
La Estancia, México Rexroth A tiempo completoJob Description* Coordinate all quality activities related to a manufacturing process, through various audits and studies preparation in order to ensure the correct operation of methods, machines and used materias1.Studies assembly by attributes for reference patterns (passes or does not pass).2. Process development capacity studies (CPK's).3. Coordination...
-
Quality Engineer
hace 1 semana
La Estancia, México Rexroth A tiempo completoJob Description* Coordinate all quality activities related to a manufacturing process, through various audits and studies preparation in order to ensure the correct operation of methods, machines and used materias1.Studies assembly by attributes for reference patterns (passes or does not pass).2. Process development capacity studies (CPK's).3. Coordination...
-
Quality Engineer
hace 1 semana
La Estancia, México Bosch A tiempo completoJob Description * Coordinate all quality activities related to a manufacturing process, through various audits and studies preparation in order to ensure the correct operation of methods, machines and used materias 1.Studies assembly by attributes for reference patterns (passes or does not pass). 2. Process development capacity studies (CPK's). 3....
-
Be Process Engineer
hace 2 meses
La Tijera, México Continental A tiempo completoYour tasks Defines technical specifications and ensures the project requirements are followed; Collaborates with suppliers and other cross-functional departments to achieve project milestones; Ensures Key Performance Indicators are achieved; Active troubleshooting and Continuous improvement orientated; Supports maintenance team. In your daily work you will...
-
Launch Engineer
hace 1 mes
La Estancia, México Rexroth A tiempo completoResponsible for the planning, management and assignment of activities to successfully launch projects under Bosch Project Management System rules, New products, New processes, New Locations, Relocations, etc. 1. Development of manufacturing concept. - Concept must be compliant to Safety, Quality and cost requirements of the product in the location. -...
-
Design Engineer
hace 2 meses
La Estancia, México Rexroth A tiempo completo**Company Description** - Series development of design solutions and maintenance of current products for linear technology products for the North American market - Be a first line of contact for Engineering Design issues in manufacturing. - Act as a connection point between local manufacturing teams & the R&D team based in Charlotte, NC. - Drawing and 3D...
-
Quality Engineer Advance
hace 2 meses
La Tijera, México Continental A tiempo completoYour tasks To be the main trust generator towards the customer,to be the leader of the entire problem solving process and to be the link between the customer's needs and the Continental well-being. Be the main customer contact and to communicate the customer requirements to the different Business Units representatives in the plant within all work...
-
Rotary Group
hace 1 mes
La Estancia, México Rexroth A tiempo completoCompany Description **Job Description**: Would you like to be part of the new plant? We are looking for a talent like you - Shaping the future: - Responsible for related area regarding assembly engineering (PLC programs, Tools, Process parameters), responsible to develop processes, design of tools, fixtures and gauges, creating of needed documentations...
-
Supplier Quality Assurance
hace 1 semana
Tetla de la Solidaridad, México GRAMMER AG A tiempo completoWe're looking for Visionaries, enablers and innovation drivers. Breaking new ground. Realizing innovative ideas. Helping to shape the future of mobility. At GRAMMER, you can make a big difference - for yourself as well. As a global partner to the automotive industry, we are successful worldwide with our two divisions Automotive and Commercial Vehicles....
-
Hardware Validation Engineer
hace 2 meses
La Noria, México Harman International A tiempo completoLocation: - MX_Queretaro Av. La Noria 170 - Additional Location: - Queretaro, Mexico - Job Family: - Engineering - Worker Type Reference: - Regular - Permanent - Pay Rate Type: - Salary - JOB ID: - R-35779-2024 **Description & Requirements**: **_Have you heard of JBL or Harman/Kardon, some of the world’s leading audio brands? The markets we are...
-
Hardware Validation Engineer
hace 2 meses
La Noria, México Harman International A tiempo completoLocation: - MX_Queretaro Av. La Noria 170 - Additional Location: - Queretaro, Mexico - Job Family: - Engineering - Worker Type Reference: - Regular - Permanent - Pay Rate Type: - Salary - JOB ID: - R-33549-2024 **Description & Requirements**: **_Have you heard of JBL or Harman/Kardon, some of the world’s leading audio brands? The markets we are...
-
Production Supervisor
hace 2 meses
La Estancia, México Bosch Group A tiempo completoJob Description"Plan and coordinate the production and assembly of the assigned products and test benches, in order to satisfy the needs established by the customers, in quality, cost and delivery, collaborating with the achievement of Rexroth goals.1. Ensure order, cleanliness, safety and discipline within the lines.• Improve order and cleanliness,...
-
Production Supervisor
hace 2 meses
La Estancia, México Bosch A tiempo completoJob Description "Plan and coordinate the production and assembly of the assigned products and test benches, in order to satisfy the needs established by the customers, in quality, cost and delivery, collaborating with the achievement of Rexroth goals. 1. Ensure order, cleanliness, safety and discipline within the lines. • Improve order and...
