Test Stand Engineer

hace 3 semanas


Santa Clara, México Flowserve A tiempo completo

Job Summary:

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. As a Test Stand Engineer, you will play a critical role in ensuring the correct operation of equipment assembled in the IPO/EPO area, diagnosing failures, and providing assertive communication with various areas involved to provide feedback on improvements.

Key Responsibilities:

  • Prepare and deliver on time requested test procedures required by customers to the laboratory supervisor, standard and engineering equipment.
  • Keep the laboratory areas (warehouses, pit, offices, equipment and instruments) clean and tidy.
  • In coordination with the laboratory management, elaborate test programs to be carried out, looking for the optimization of engine assemblies and arrangements.
  • Elaborate adjustment instructions to pumps (P-594) and/or release. Registering this in the network and informing all personnel involved in a maximum of one hour after the end of the test.
  • Provide support to production areas regarding instructions issued and review compliance.
  • Review hydraulic inspection reports issued by QA personnel.
  • Deliver on time the test reports made by the same.
  • Prepare daily test reports.
  • Maintain safe laboratory operation by detecting and ensuring unsafe conditions and acts are eliminated. Comply with safety audits.
  • Maintain the instrumental equipment in the laboratory in optimal condition.
  • Test 100% of the pumps programmed by production.
  • Attend and accredit internal corporate and external audits.
  • Participate in MRBs related to hydraulic testing.
  • Review of pump selection, operating conditions, to ensure that during the test the equipment complies with the hydraulic and mechanical behavior according to the applicable standards.
  • Load in master program one month in advance: bench, engine to be used, as well as indicate piping, arrangements and booster pump to be used for the tests to be performed.
  • To carry out tests of: Performance, NPSH, mechanical, motor run test, impact test, special test

Requirements:

  • Mechanical, industrial, mechatronics or similar engineering, with solid knowledge in hydraulics.
  • Intermediate - Advanced English. Able to hold technical discussions with customers.
  • Knowledge of ASME/ANSI, AWWA, etc. piping standards.
  • Interpretation of hydraulic performance curves.
  • Equipment assembly.
  • Interpretation of vibration results, provide recommendations and solutions to common vibration problems in test laboratory.
  • Solid knowledge of API, HIS and ISO standards.
  • Knowledge of Mechanical Seals
  • Experience in rotating equipment manufacturing companies
  • Knowledge of equipment testing, electrical, instrumentation,
  • Interpretation of operating curves
  • Knowledge of test laboratory assembly activities.
  • Engineering, mechanics, basic fluid hydraulics.
  • Knowledge of engine starting, test laboratory measuring instruments (pressure gauges, torque gauges, power, pressure, etc.).
  • Knowledge of instrumentation.
  • Medium to advanced use of excel
  • Basic hydraulic modifications (affinity laws).
  • Knowledge of geometric and dimensional tolerances.
  • Knowledge of measuring instruments.
  • Interpretation of P&ID drawings, general arrangement, machining of components.
  • Autocad 2D
  • Basic knowledge of electricity: transformers, motors, starters.
  • Knowledge of industrial safety

  • Test Stand Engineer

    hace 3 meses


    Santa Clara, México Flowserve Corporation A tiempo completo

    Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your...

  • Test Stand Engineer

    hace 4 meses


    Santa Clara Municipality, México Flowserve A tiempo completo

    Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than...

  • Test Stand Engineer Jr

    hace 3 meses


    Santa Clara, México Flowserve Corporation A tiempo completo

    Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your...

  • Flowserve Test Engineer

    hace 2 semanas


    Santa Clara, México Flowserve A tiempo completo

    Test Engineer - Hydraulic SystemsFlowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Our Purpose drives us to build a more sustainable future, making the world better for everyone. With over 16,000 employees in more than 50 countries, we combine our global reach with local presence, supporting...


  • Santa Clara Municipality, México Flowserve A tiempo completo

    Fungir como líder de ingeniería de pruebas hidráulicas en el laboratorio Flowserve Santa Clara. Ser el punto de apoyo a los demás ingenieros de pruebas para para dar retroalimentación sobre mejoras, preparativos de prueba, resultados y solución de problemas propios de la fabricación de los equipos de bombeo de Flowserve Santa Clara. Así mismo,...


  • Santa Catarina, Nuevo León, México Carrier A tiempo completo

    About the RoleWe are seeking a highly motivated and detail-oriented Test and Validation Engineer to join our team at Carrier Global Corporation.As a Test and Validation Engineer, you will be responsible for analyzing equipment and processes, preparing equipment for testing, and ensuring that systems run according to necessary specifications.Key...

  • Test Engineer Jr

    hace 1 semana


    Santa Catarina, Nuevo León, México Carrier A tiempo completo

    About the RoleCarrier Global Corporation is a global leader in intelligent climate and energy solutions, committed to creating solutions that matter for people and our planet. We're seeking a talented Test Engineer Jr to join our team.Key ResponsibilitiesConduct comprehensive testing on air conditioning units to ensure compliance with industry...


  • Santa Catarina, México Carrier A tiempo completo

    **Country**: Mexico **Location**: LOC5016: Carrier - Plant E, Carretera. Villa de García Km 3.0, Santa Catarina, 66350 Mexico **Role**: Test and Validation Engineer **Location**: Santa Catarina **Build a career with confidence.** Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that...

  • Senior Test Engineer

    hace 2 semanas


    Santa Catarina, Nuevo León, México Carrier A tiempo completo

    About the RoleThe Senior Test Engineer is a critical member of our team, responsible for ensuring the quality and reliability of our electronic products. This role requires a strong understanding of electronic systems, testing methodologies, and quality control processes.Key ResponsibilitiesDesign and develop automated test systems and software programs for...

  • Test Engineer Jr

    hace 3 semanas


    Santa Catarina, México Carrier A tiempo completo

    Country: MexicoLocation: Monterrey Technology HubRole: Test Engineer JrLocation: Carrier - Plant E, Carretera. Villa de García Km 3.0, Santa Catarina, 66350 MexicoFull/ Part-time: full timeBuild a career with confidence.Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for...


  • Santa Catarina, México Carrier A tiempo completo

    Country: MexicoLocation: LOC5002: Carrier - Plant B, Carretera a García Km. 1.3, Parque STIVA, Santa Catarina, 66350 MexicoRole: Global Sourcing Senior Test EngineerLocation: MXFull/ Part-time: Full timeBuild a career with confidenceCarrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that...


  • Santa Catarina, México Carrier A tiempo completo

    Country: MexicoLocation: LOC5002: Carrier - Plant B, Carretera a García Km. 1.3, Parque STIVA, Santa Catarina, 66350 MexicoRole: Global Sourcing Senior Test EngineerLocation: MXFull/ Part-time: Full timeBuild a career with confidenceCarrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that...

  • Test Engineer

    hace 4 meses


    Santa Catarina, México Carrier A tiempo completo

    **Country**: Mexico **Location**: LOC5016: Carrier - Plant E, Carretera. Villa de García Km 3.0, Santa Catarina, 66350 Mexico **Role**: Test Engineer **Location**: CMX E **Full/ Part-time**: Full time **Build a career with confidence** Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating...


  • Santa Rosalía de Camargo, Chih., México Signify A tiempo completo

    Camargo, Mexico Category Manufacturing Posted Date 09/10/2024 Job Id 352933 We’re looking for a **Industrial Test Development Engineer** to join our **Color Kinetics team **in **Camargo, Chihuahua (MX Citizen) or Burlington MA (US Citizen).** Working for Signify means being creative and adaptive. Our culture of continuous learning and commitment to...

  • Test Engineer Jr

    hace 3 semanas


    Santa Catarina, Nuevo León, México Carrier A tiempo completo

    About the RoleWe are seeking a highly skilled Junior HVAC Test Engineer to join our team at Carrier. As a key member of our engineering team, you will be responsible for conducting comprehensive testing on air conditioning units to ensure they meet industry standards and regulations.Key Responsibilities:Conduct thorough testing on air conditioning units to...


  • Santa Catarina, México Caterpillar A tiempo completo

    **Career Area**: Engineering **Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress...

  • Mechanical Engineer

    hace 2 semanas


    Santa Catarina, Nuevo León, México Carrier A tiempo completo

    **Job Summary:**We are seeking a highly skilled Mechanical Engineer to join our team at Carrier. As a Mechanical Engineer, you will play a key role in the development of our products, ensuring they meet the highest standards of quality and performance.**Key Responsibilities:**Participate in product development activities, including engineering studies,...

  • Test Engineer

    hace 3 semanas


    Santa Catarina, Nuevo León, México Carrier A tiempo completo

    About the RoleWe are seeking an experienced Test Engineer to join our team at Carrier Global Corporation. As a key member of our Engineering department, you will be responsible for analyzing and testing electrical systems to ensure they meet our high standards of quality and safety.Key ResponsibilitiesConduct electrical and performance evaluations on Air...


  • Santa Clara, México Flowserve Corporation A tiempo completo

    **Role Summary**: This role is part of Global Technology and Engineering Center (GTEC). The activities of this role are primarily focus on Quality Assurance, Creation of Dossiers and Customer documentation. The incumbent performs quality inspections and collection of job documentation. **Responsabilities**: - Review Transfer files and participate in the...


  • Santa Anita, México Continental A tiempo completo

    Your tasks Core Responsibilities - Lead all system test activities. - Lead, plan and organize test packages for the product. Assign work items to each test engineer part of the project. - Support the validation of customer and internal requirements. - Analyze customer and system product requirements to determine the best test procedure and test strategy for...