Engineer.Quality.IV

Responsibilities Include:

Advisement, coordination, and interaction with all departments to accomplish all objectives. Assuring provisions for the use of checklists, process sheets, travelers, and drawings. Assure that he/she is present when inspections are required. Be able to continuously travel between and work from different NOV and vendor facilities locations as necessary. Determination of necessary hold points for inspections and tests to be performed. The authority to accept, reject, and to place on hold any item or operation where conformance to drawing, specification, contract and/or purchase order is not being accomplished. Verification of operations set up and/or fit up. In-process inspection of all metal prep/saw, weld shop and machine shop operations. Visual and dimensional inspection of all weldments prior to blast, paint, heat treat, etc. 100% final inspection. Review all parts and/or equipment, as necessary, prior to shipment. Verifying and accepting Material Test Reports (MTRs). Work to complete any documentation required by customer, purchase order, or specification. Perform NDE and/or dimensional inspection as needed. Familiar with and maintains PQRs (Procedure Qualification Record), WPSs (Weld Procedure Specification), and WPQs (Weld Performance Qualification). Familiar with and maintain calibration and calibration records of tools and equipment. Maintenance of records as described in the QA Procedure Manual. Maintain welder continuity. Create, issue, and follow up on NCR’s (Nonconformance Report) and CAR’s (Corrective Action Request), while assisting with RCA (Root Cause Analysis). Adhere and support all company rules and policies. Must follow and enforce all safety and environmental policies and programs; must be able to use personal safety devices as required by company policy; report any activities that could be detrimental to the safety and/or the loss of productivity; report any injuries when they occur.

POSITION: QC Inspector

LOCATION: Guadalupe (Monterrey), Nuevo Leon, Mexico; Vendor facility

List of minimal requirements for this position:

Minimum of three (3) years of experience in Quality Control, Welding and Fabrication Inspection, Machining Inspection. Excellent verbal and written communication skills; must be able to read, write, and speak English . Proficient in Microsoft Office. Good interpersonal working skills.

The following items are necessary to perform job duties:

Lifting (25 Bending Stooping Walking Good Hearing Standing (5-6 Hours per day) Sitting (2-3 Hours per day) Pushing (25 Pulling (25 Good Vision

---