Smt Sr Engineer
hace 4 semanas
Eaton’s IS VEH EMB division is currently seeking a SMT Sr Engineer.
**What you’ll do**:
Responsible to design, validate and implement manufacturing systems; including process documentation, control and optimization through the life of the product. An Engineer seeks and promotes the continuous improvement of the manufacturing processes on current and transfers businesses.
**Responsibilities**:
1 Supports Production Area, contribute to the SQDCI metrics of the focus factory.
2 Participate on required meetings related to the focus factory, participates in safety assessments and generate JSA and MOC (Job safety analysis and Management of changes)
3 Defines and implement safety machine guarding to manufacturing equipment as per Eaton requirements
4 Create, design, validate and implement manufacturing systems (assembly lines) including documentation (PFMEA, WIs, Control plan, flow chart, procedures) and establishes and implement process controls.
5 Participate on quality system improvements and implement changes accordingly
6 Develop and implement tools as per new or revised requirements (standard tooling) and new design fixtures for assembly (fixtures, stencils, wave pallets)
7 Establishes preventive maintenance program for new assembly systems or stations.
8 Create reports, graphics and Statistical Process Control dashboards and responds to out of goal measurements.
9 Develop and implement Industry 4.0 initiatives linked to an automotive mindset
10 Develop and implement product changes such as ECO’s and deviations.
11 Seeks and promotes the continuous improvement (Lean manufacturing system), Uses daily production data (yields/thru-put/etc.) to develop and execute corrective actions plans to drive continuous improvement.
12 Routing management in the ERP system (SAP), Participate during layout changes.
**Qualifications**:
**Preferred education level**:
- Bachelor’s Degree in Industrial Engineering, Electronics or Mechanics (or similar)
**Years and area of experience required**:
- 3-5 years of experience in manufacturing and equipment areas and/or similar position.
- 1-3 years of experience on building electronic products (SMT, assembly, wave solder, mechanical assembly, coating, magnetics and wire assembly, spot welding, encapsulated, packing and labeling, etc.)
**Technical knowledge**:
- Strong Knowledge on low value high mix environment driving more than 800 sub -assembly part numbers and more than 5,500 part numbers for raw material, 2 years of experience solving QA issues, implementing process controls and process improvements.
**Soft skills**:
- Strong knowledge of process for electronic products, Strong written and verbal communication skills in English and Spanish, Strong knowledge of IPC-A-610, IPC- WHMA-A-620, IPC-7711/21 soldering requirements, Basic knowledge of TS16949 standard, highly skilled on solid works, project, auto cad, view mate and MFG Pro Management (preferred), This position drives the core competency of the plant, the latest technology for electronic assemblies is been utilize on the SMT area. w material, 2 years of experience solving QA issues, implementing process controls and process improvements.
We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.
-
Sr. Manufacturing Smt Engineer
hace 1 semana
Tijuana, México North American Production Sharing de México S.A. de C.V. A tiempo completoEmpresa internacional dedicada a la electrónica busca **Sr. Manufacturing SMT Engineer** **Actividades**: - Elabora layout de áreas de producción. Elabora y actualiza diagramas de flujo. Actualiza y corrige procedimientos de manufactura. Toma tiempos y balanceo de lineas. Realiza corridas para pruebas de diseno de manufactura. Documentar cambios y...
-
Sr. Manufacturing Smt Engineer
hace 1 semana
Tijuana, México Emprego MX A tiempo completoDescripción y detalle de las actividades Empresa internacional dedicada a la electrónica busca Sr. Manufacturing SMT Engineer Actividades: Elabora layout de áreas de producción. Elabora y actualiza diagramas de flujo. Actualiza y corrige procedimientos de manufactura. Toma tiempos y balanceo de lineas. Realiza corridas para pruebas de diseno de...
-
Sr. Manufacturing Engineer
hace 1 semana
Tijuana, México North American Production Sharing A tiempo completoEmpresa internacional dedicada a la electrónica busca **Sr. Manufacturing SMT Engineer** **Actividades**: - Elabora layout de áreas de producción. Elabora y actualiza diagramas de flujo. Actualiza y corrige procedimientos de manufactura. Toma tiempos y balanceo de lineas. Realiza corridas para pruebas de diseno de manufactura. Documentar cambios y...
-
Smt Engineer
hace 2 meses
Tijuana, México Emprego MX A tiempo completoDescripción y detalle de las actividades Empresa de giro electrónico ubicada en otay busca SMT ENGINEER: OBJETIVO: Asegura el buen funcionamiento de las máquinas SMT, sus procedimientos y formatos. FUNCIONES PRINCIPALES: 1. Mantenimiento Preventivo y correctivo en máquinas empastadoras, Montadoras (Pick and Place), Horno Reflujo, AOI, SPI. 2....
-
Smt Engineer
hace 1 semana
Tijuana, México Emprego MX A tiempo completoDescripción y detalle de las actividades Experiência y requisitos Must have the following skills, abilities and knowledge: - Problem solving skills. - Experience with Windchill, and SAP are preferred. - Conversational english is required. - Electronics processes experience is required. - PFMEA & Control plan knowledge is required. Qualifications - 5-7...
-
Smt Engineer
hace 2 meses
Tijuana, México North American Production Sharing de México S.A. de C.V. A tiempo completoEmpresa de giro electrónico ubicada en otay busca **SMT ENGINEER**: **OBJETIVO**: - Asegura el buen funcionamiento de las máquinas SMT, sus procedimientos y formatos. **FUNCIONES PRINCIPALES**: 1. Mantenimiento Preventivo y correctivo en máquinas empastadoras, Montadoras (Pick and Place), Horno Reflujo, AOI, SPI. 2. Programación del equipo SMT. 3....
-
SMT Sr Engineer
hace 3 semanas
Tijuana, B.C., México Eaton Corporation A tiempo completoEaton’s IS VEH EMB division is currently seeking a SMT Sr Engineer. What you’ll do: Responsible to design, validate and implement manufacturing systems; including process documentation, control and optimization through the life of the product. An Engineer seeks and promotes the continuous improvement of the manufacturing processes on current and...
-
Sr. Smt Engineer
hace 6 días
Tijuana, México Emprego MX A tiempo completoDescripción y detalle de las actividades Experiência y requisitos 10. Ensure that process parameters are within acceptable tolerances for products and components, and result in solder quality that meets customer requirements. 11. Follow product launches to validate process effectiveness and implement necessary improvements. 12. Aid the production floor...
-
Smt Engineer
hace 4 días
Tijuana, México North American Production Sharing de México S.A. de C.V. A tiempo completo**OBJETIVO**:Asegura el buen funcionamiento de las máquinas SMT, sus procedimientos y formatos. **FUNCIONES PRINCIPALES**: 1. Mantenimiento Preventivo y correctivo en máquinas empastadoras, Montadoras (Pick and Place), Horno Reflujo, AOI, SPI. 2. Programación del equipo SMT 3. Mantiene la Integridad del Funcionamiento de las máquinas SMT 4. Asegurar...
-
Sr Npi Engineer
hace 2 días
Tijuana, México Emprego MX A tiempo completoDescripción y detalle de las actividades Experiência y requisitos - Experience in Electronics: o Minimum 7 year experience in SMT Process. o Minimum 7 year experience in Through hole, Radial, Router, Selective and Wave Process. o Programming and recipes development on SMT (Screen Printer, SPI, Reflow Oven Profiling, AOI, X-ray programming). o Strong...
-
Smt Manufacturing Engineer
hace 1 mes
Tijuana, México Eaton Corporation A tiempo completoEaton’s VEH EMB eMobility division is currently seeking a SMT Manufacturing Engineer. **What you’ll do**: Responsible to design, validate and implement SMT manufacturing systems; including process documentation, control and optimization through the life of the product. An Engineer seeks and promotes the continuous improvement of the manufacturing...
-
Smt Manufacturing Engineer
hace 2 días
Tijuana, México Emprego MX A tiempo completoDescripción y detalle de las actividades Responsible to design, validate and implement SMT manufacturing systems; including process documentation, control and optimization through the life of the product. An Engineer seeks and promotes the continuous improvement of the manufacturing processes on current and transfers businesses. - Supports Production Area,...
-
Sr Process Engineer
hace 2 meses
Tijuana, México CommScope A tiempo completoIn our ‘always on’ world, we believe it’s essential to have a genuine connection with the work you do. Technology is reshaping the way we live, learn and thrive! In this "always-on" world, we believe it is meaningful to have a genuine connection with the work you do. The epicenter of this transformation is powered by the world's most sophisticated...
-
Sr Process Engineer
hace 6 días
Tijuana, México CommScope A tiempo completoIn our ‘always on’ world, we believe it’s essential to have a genuine connection with the work you do. Technology is reshaping the way we live, learn and thrive! In this "always-on" world, we believe it is meaningful to have a genuine connection with the work you do. The epicenter of this transformation is powered by the world's most sophisticated...
-
Sr Process Engineer
hace 1 hora
Tijuana, México CommScope A tiempo completoIn our ‘always on’ world, we believe it’s essential to have a genuine connection with the work you do. Technology is reshaping the way we live, learn and thrive! In this "always-on" world, we believe it is meaningful to have a genuine connection with the work you do. The epicenter of this transformation is powered by the world's most sophisticated...
-
Manufacturing Engineer Smt
hace 4 días
Tijuana, México Flex A tiempo completoThrough the collective strength of 170,000 team members across 30 countries and responsible, sustainable operations, Flex, a Fortune global 500 company, is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. We welcome people of all backgrounds. A career with...
-
Npip Smt Engineer
hace 1 semana
Tijuana, México Bose A tiempo completoJob Description Job Profile Summary **Responsibilities**: - In charge of daily follow up and update of all NPIP builds scheduled. - Minimum of 5-7 years experience in SMT (surface mount technology) & through hole processes. - Coordinate with all TJ engineers, planners and purchasing teams to complete the builds in time and with quality. - Generate run...
-
Smt Engineer
hace 4 días
Tijuana, México Emprego MX A tiempo completoDescripción y detalle de las actividades OBJETIVO: Asegura el buen funcionamiento de las máquinas SMT, sus procedimientos y formatos. FUNCIONES PRINCIPALES: 1. Mantenimiento Preventivo y correctivo en máquinas empastadoras, Montadoras (Pick and Place), Horno Reflujo, AOI, SPI. 2. Programación del equipo SMT 3. Mantiene la Integridad del Funcionamiento...
-
Sr. Manufacturing Engineer
hace 2 meses
Tijuana, México Michael Page A tiempo completoKey Responsibilities:Adhere to product Safety and Quality guidelines.Monitor and implement quality procedures for manufacturing, packing, inspecting, and handling products.Adjust production programs within set time-lines, ensuring variations stay within acceptable limits.Maintain accurate documentation for production programs and investigate repetitive...
-
Sr. Quality Engineer
hace 1 semana
Tijuana, México Ensambles Hyson, S.A. de C.V. A tiempo completoDescripción y detalle de las actividades Overview The Sr. Quality Engineer will be responsible to provide quality support and the development of manufacturing processes for molding areas. Responsibilities This individual will be responsible to provide quality support and the development of manufacturing processes for molding areas. The engineer will use...
