Manufacturing Engineer

hace 1 día

Guadalupe, México STERIS A tiempo completo

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.

**Position Summary**:
Responsible to act as manufacturing liaison and coordinate all activities affecting the introduction of new products into the manufacturing cycle. Responsible for development and expense control of manufacturing capital equipment and tooling needed for new product manufacture. Participates in product design and overall project and manufacturing schedule development. Evaluates, selects and applies Manufacturing Engineering techniques to develop economical and efficient methods to produce piece parts and/or assemblies. Provides necessary input to develop cost, prepare manufacturing specifications for various operations/work stations.

Recommends and implements design changes to improve reliability, manufacturability and cost.

**Duties**:

- Review and help generate product documentation pertaining to engineering drawings including initial release and subsequent revisions.
- Review products for the purpose of reducing cost of manufacturing through value analysis, material substitution, process changes, make/buy decisions. Recommend rearrangement of plant facilities.
- Helps to develop manufacturing schedules and generates manufacturing plans for prototype, pre-production and production.
- Develop clear and concise manufacturing specifications/instructions to maintain quality and to assure smooth work flow through the factory.
- Provide floor support during the manufacturing cycle, verify standards, and update manufacturing specifications.
- Develop workmanship standards to accommodate manufacturing/inspection and assure conformance to specifications.
- Develop standard cost estimates and establishes standard cost.
- Assure manufacturing facilities, tooling and test equipment are available to mmet production requirements.
- Perform manufacturing studies leading to recommendations for new and improved methods, procedures and equipment utilization.

**Education Degree**:

- Bachelor's Degree in Engineering General

**Required Experience**:

- Bilingual
- Bachelor’s Degree Mechanical, Manufacturing or related
- Four to five (4 to 5) years experience in manufacturing engineering disciplines, with progressively more responsibility.
- Must be technically knowledgeable to Good Manufacturing Practices relating to machines, metal forming, metal joining, assembly.
- Experience with Pro-Engineer (Pro-E) and AutoCAD preferred.
- Experience working in engineering and/or manufacturing of medical equipment.

**Skills**:

- Cross-Functional Leadership, results oriented, project management experience.
- Excellent organizational, interpersonal, communication skills.
- Demonstrated team-building skills and ability to coach others.
- Demonstrated technical knowledge related to area of responsibility.
- Problem solving skills

STERIS is a leading provider of products and services that meet the needs of growth areas within Healthcare: procedures, devices, vaccines and biologics. We exist to fulfill our MISSION TO HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD. STERIS is a $3B, publicly traded (NYSE: STE) company with approximately 16,000 associates and Customers in more than 100 countries.

STERIS strives to be an Equal Opportunity Employer.

  • Manufacturing Engineer

    hace 2 semanas

    Guadalupe, México Grupo Prodensa A tiempo completo

    **MANUFACTURING COMPOSITE ENGINEER.** **Knowledge, Skills, and Abilities**: - Bachelor’s degree in engineering (mechanical, electrical, industrial) combined with 5 to 10 years of manufacturing experience with an important understanding of manufacturing site start up. Any other pertinent experience may be considered. - Bilingualism (English and...

  • Manufacturing Engineer

    hace 2 semanas

    Guadalupe, México DMTC Technology Services, S. de. R.L. de C.V. A tiempo completo

    We are looking for a dedicated Manufacturing Engineer to join our team for DMS Assembly line, to provide support and confirm products that satisfy customer requirements. You will work closely with design department and internal team to validate, implement and run changes applied to DMS product. As Manufacturing Engineer, you will have different...

  • Manufacturing Engineer

    hace 7 días

    Guadalupe, México STERIS A tiempo completo

    At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. **Position Summary**: Responsible to act as manufacturing liaison and coordinate all activities affecting the introduction of new products into the manufacturing cycle. Responsible for...

  • Manufacturing Engineer

    hace 4 días

    Guadalupe, México STERIS A tiempo completo

    At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.**Position Summary**:Responsible to act as manufacturing liaison and coordinate all activities affecting the introduction of new products into the manufacturing cycle. Responsible for...

  • Manufacturing Engineer

    hace 1 hora

    Guadalupe, México STERIS A tiempo completo

    At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.**Position Summary**:Responsible to act as manufacturing liaison and coordinate all activities affecting the introduction of new products into the manufacturing cycle. Responsible for...

  • Manufacturing Engineer

    hace 3 semanas

    Guadalupe, México STERIS A tiempo completo

    At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.**Position Summary**:Responsible to act as manufacturing liaison and coordinate all activities affecting the introduction of new products into the manufacturing cycle. Responsible for...

  • Process and Manufacturing Engineer

    hace 2 semanas

    Guadalupe, México Flora Manufacturing Private Limited A tiempo completo

    Job Title: PROCESS AND MANUFACTURING ENGINEER Id: Area: OPERATIONS Immediate Boss Position: PRODUCTION MANAGER Work Center: SWF MONTERREY Date: 05-06-23 **Mission of the position**. State the raison d'être of the position in the Organization, what it was created for, which derives from functions and results. That is, the main function and overall...

  • Senior Manufacturing Engineer

    hace 2 semanas

    Guadalupe, México STERIS A tiempo completo

    At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.**Position Summary**:Responsible to act as manufacturing liaison and coordinate all activities affecting the introduction of new products into the manufacturing cycle. Responsible for...

  • Process and Manufacturing Engineer

    hace 2 semanas

    Guadalupe, México Flora Manufacturing Private Limited A tiempo completo

    Job Title: PROCESS AND MANUFACTURING ENGINEERId:Area: OPERATIONSImmediate Boss Position: PRODUCTION MANAGERWork Center: SWF MONTERREYDate: **Mission of the position**. State the raison d'être of the position in the Organization, what it was created for, which derives from functions and results. That is, the main function and overall result that the occupant...

  • Manufacturing/process Engineer

    hace 2 horas

    Guadalupe, México Solventum A tiempo completo

    **Manufacturing/Process Engineer (Solventum)****3M Health Care is now Solventum**At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data...